海砂淡化設備具有嚴格的操作流程，操作不當會發生安全事故和嚴重的設備損壞，還會造成成品沙氯離子不穩定及緩釋現象等產品不合格重新翻洗等嚴重后果。

Sand desalination equipment has strict operating procedures, improper operation accidents and serious damage to the equipment, but also caused the sand chloride unstable phenomenon and release product failed to turn washing and other serious consequences.

正確的海砂淡化設備如下：

The correct operation of desa         cess is as follows:.

開機采用倒序開機法，即：從后往前開機，分別為：淡化機組開啟——成品料輸送動力——廢料動力——供水系統——第三清洗動力——淡化劑攪洗筒——第二清洗動力——第一清洗動力——篩分設備——原料輸送動力——給料機

啟動過程中，觀察各部位旋轉方向與操作按鈕標示是否一致。若方向相反，應調換電源相線予以糾正。

設備試運轉過程中，注意觀察傳動部件是否有沖擊現象或異常噪聲，必要時立即停機檢查，嚴禁帶病作業。

Boot boot using reverse method, namely: from the back after the boot, respectively: desalination unit opened - finished material transfer power - power supply system: Third - waste cleaning power, desalination agent stirring washing cylinder second cleaning power -- the first cleaning power - screening equipment, raw material conveying power feeder
In the process of starting, observe whether the rotation direction of each part is consistent with the operation button. If the direction is opposite, change the power line to correct it.
During the test operation of the equipment, attention should be paid to whether the transmission parts have impact or abnormal noise. When necessary, the machine is stopped immediately and the disease operation is strictly prohibited.

停機是采用正序停機發，分別為：給料機——原料輸送動力——篩分動力——供水系統——第一清洗動力——第二清洗動力——淡化劑攪洗筒——第三清洗動力——淡化機組——廢料輸送動力——成品沙輸送動力

Stop is uses the positive stop, respectively: feeder - raw material conveying power -- power supply system -- the first screening - cleaning power - second cleaning power - desalination agent - Torgovnik stirring washing cylinder third cleaning power - desalination units - waste transfer driving force -- finished sand conveying power

詳情登入：http://umoiffk.cn